Search found 4 matches

Go to advanced search

by Stevedspeed
Thu May 03, 2007 8:42 pm
Forum: Operation
Topic: It doesn't do what it says on the screen
Replies: 5
Views: 4468

Hi, The saga continues. My apologies if this post seems to drag on, but I've done all the things suggested & here are the results: 1. With the engine running in 2D mode, the DC voltage on the SAW line is O.01 volts at tickover, INCREASING to 0.02 at approx 3000 revs, but the timing stays exactly...
by Stevedspeed
Thu May 03, 2007 7:32 am
Forum: Operation
Topic: It doesn't do what it says on the screen
Replies: 5
Views: 4468

Martin, I have now got a spare Edis, VR sensor & coil pack, with all connectors. Last night I refitted the original system to the car, in limp home mode it started 1st time & ran ok. I checked & the timing didn't vary with revs. I swapped Edis units & the result was the same. Then I ...
by Stevedspeed
Wed Apr 11, 2007 9:15 am
Forum: Operation
Topic: It doesn't do what it says on the screen
Replies: 5
Views: 4468

Thanks Martin, I'll do that, but it won't be this week as I've got 2 sprints this weekend & I don't want to be refitting the distributor system at 10pm the night before, as I did last week. In fact when I do it I'll leave the distributor as it is, & just change the 12v feeds & plug leads...
by Stevedspeed
Tue Apr 10, 2007 4:00 pm
Forum: Operation
Topic: It doesn't do what it says on the screen
Replies: 5
Views: 4468

It doesn't do what it says on the screen

Hi, I've fitted an TPS Megajolt, bought as an assembled unit, to a ford crossflow. I checked everthing at each stage, except that my timing light won't work with this, so I hadn't checked the timing. The Edis unit worked fine before I installed the Megajolt, and the configuration screen let me load ...

Go to advanced search