Autosport Labs

Thanks for that Brent, outstanding support for your product. I will try to get motivated to download the new version and get tuning again. The old girl is running fine at the moment but I have changed fuel to straight LPGas and get the odd backfire at startup, this may be a combination of leads, plu...

Hi guys I have a V3 megajolt and would like to know if I can run the V4 config software, I have been upgrading my motor on my car and is now a 1999 inline 6 in a 1969 XW Ford Falcon, Australian. I have read about some of the updates for the V4 config and how much easier it is to adjust the Ignition ...

I did some work on the car on the weekend and have found that when I change a cell setting I have to write config and then flash within 5 seconds or the advance guage will change back to the original value. For instance if I change a cell from 16 to 20, click out of the cell and write config the adv...

Once i have changed the figure, I click out of the cell and it stays at the correct figure then I click on the write config button in the toolbar and the advance guage momentarily changes from 36 to 16 then back to 16, while the cell remains at 16. If I then change to map1 and back to map2 the cell...

* How are you updating the value 5 degrees at a time- are you typing in a new value in the grid cell? I am updating in the main grid using the spin buttons - if you're using the main grid: - Are you pressing the 'write ignition config' button in the toolbar, correct? - Also, when actually editing th...

I have all the gear installed, the car is running with the basic MAP, on LPG and ULP. With 3.2.1 config with dual maps enabled, adjusting map option 2. The problem Im having is that when tuning I can adjust a setting/cell a few times and then for some reason it stops updating. For instance, at idle ...

Guys I have done a quick install of my setup and it all appears to be working fine. Im in Australia with a pre-crossflow inline 6, 250 CI with a 2V head running LPG and ULP. I just need to drill a few holes and mount it all correctly and it will run fine, then tuning and it will be perfect. The Ques...