Autosport Labs

i tried this, still no joy. i really think one of the edis components are not working, is there any way i can check them?

thanks for the reply, but i still have no spark. I did some reading and found this reply to a similar situation: "No spark at all indicates an EDIS problem so let's get back to basics: - take the MJLJ out of the car completely - take all the plugs out and all but one off the ignition leads - re...

"Since the EDIS module can operate the engine by itself in a "limp-home" mode, with the advance fixed at 10 degrees BTDC, it's recommended you install the EDIS module and coil packs first, and then verify your engine runs before wiring in the MJLJ." i have all the plugs wired to ...

thanks, any idea on what the systems might be called or who they were available from?

Tom

Thanks for the info, ive read through the FAQ but im not sure how 'aggressive' is 'aggressive', if you see what i mean!

It turns out we have run an injection system with a MAP sensor with this cam and it worked fine so i think we'll go that route and see what happens.

Hi We are interested in using a mega jolt system on our porsche 914 SCCA race car. We have some questions to relate directly to this application; Firstly would you recomend a MAP or TPS system? our cam has 310 degrees of duration and .5" lift and is intended for race use only, that said this ca...