Autosport Labs

EDboy

Possibly this forum would better answer your original question.
http://www.fordforums.com.au/showthread.php?t=74982


________
Motorcycle Tires

Martin, yes the engine is at TDC in the photo. Brent you can use this and any other photo's as you wish. One other thing, testing the VR sensor after installation. I connected a digital volt meter set on AC volts directly to the VR sensor. With the engine at idle about 800 rpm i was reading 9.4V and...

Trigger wheel and VR sensor installation. How too, tips and pitfalls for installing on a 351 Cleveland, it?s a big motor but there?s not much room to mount anything. The first and hardest discission, where to mount the VR sensor and how to mount the trigger wheel. http://home.wildit.net.au/mich/101...

Thanks for the quick response.


So it's now align as per the photo.





________
CLEMENTE BIONDETTI

:?: When positioning the VR sensor above it's trigger tooth (50degs for a V8 ), where should the centre line of the VR sensor point too? The top leading edge of the tooth. The centre of the tooth. The top trailing edge of the tooth. Thanks in advance. ________ Mercedes-Benz High Performance Engines ...

Would support for the Ford TFI distributor be possible (not the signature PIP distributor), as the PIP signal is already present. Can the existing code be modified to provide a SPOUT output instead of SAW and released as TFI only firmware. This may be a step backwards in technology, but there would ...