Autosport Labs

Hi guys ive got megajolt V3 fitted to a 2.0L supercharged pinto and its been on there since 2007 without any problems. the car was laid up for 4 months over the winter & christmas period but not the engine misfires very badly between 2000 - 4000rpm under load. Ive check with a timing light at id...

sorry to drag this post back up but a set of feeler gauges are perfect for setting the gap very accurately (you the things you use to set psark plug gaps, valve clearances etc). I just thought id mention it.

thanks for your reply! i look forward to the updates then

Im sorry to have to do this but im not all that clued up on whats going on regarding the new controller (V4) and changes to the V3. Am i right in thinking that V4 is a totally new board with loads of new features (like this Aux input ive read about)? and i am right in thinking that the V3 board is h...

Ive also had a go at the headphone/ amplifier but havent got around to using it yet. i did here a bit of knock the other day buts its the first time i have. my map/ fueling cant be far off but obviously under some conditions it can be generated. i think that is where the new megjolt will come in ver...

thats looks like it might work! as its been said before, determining what knock actually is for your particular engine is the main problem- it might be happening but the sensor you have off say some other engine might not detect it. to get aorund this you could get one of the audio aplifier kits fro...

sorry to drag this one back up but i thought i should give an update: its fixed! on closer inspection of the vr sensor i realised that the crank pulley had burned through the side of the sensor and was touching the bared copper strands! i guess it was effectively shorting the sensor and hence no out...

mine: supercharged 2.0l engine. the dizzy (even with a retard capsule) just couldnt give me the advance i want under all load conditions. the megajolt allows any advance i want at any load vs rpm- perfect!. the engine in standard trim has 98 bhp. with the supercharger one or two other choice mods an...

assuming the engines fueeling is setup correctly then the leaning out when adjusting the timing will be due to it producing a more efficient burn. your not trying to adjust the timing to get the mixture right though. but it is a useful tool, for example, if your leaning out under full load, you may ...

Hi Brent good work on the new Megajolt! i really like the aux input part. I would be looking to use it in conjunction with knock sensing, but like you have already said, itl need to investigating. my question is- what sort of input does the aux require?- im not an electronics whizz so could you have...

thanks for the voltages post. ive been doing some testing. When i went outside it fired straight up! grrr! i did the voltagaes check, everything checked out ok, and it ran ok without megajolt connected. pluged megajolt back in and it ran ok again. then after a couple of minutes it started acting up ...

the onyl issue with the last diagram is- if the megjolt went down for what ever reason, would you be able to get home- limp home mode wouldnt be much use then?

the trigger wheel is definately in the correct position. the vr sensro is tight and hasnt moved. im going to do some testing while cranking, but i need to know what i should be getting on the mutlimeter to make sure everythings ok. what should i get from the vr sensor- during cranking. also what sho...

Ok ive had the megajolt in for almost a year now, and its been faultless up until now. I was out doing some fuel pump and regulator testing when shes popped, banged and then rolled to a stop. i was redlining it at the time. the engine is ok mechanically because it turns over ok and occasionally fire...

I have a question regarding the cranking load/rpm bin (1,1). am i right in thinking the the megjolt looks this bin up during cranking?- if so what sort of advance figure do i want in there- higher than my idle advance or lower? if its higher than the idle advance, how much higher should it be for ex...