Autosport Labs

I can't the vacuum hose bulkhead fitting in the UK anywhere. Can someone help me please? Thanks, David

First off I'd like to say congratulations, and thanks for posting up the pictures. I have a Dolomite Sprint. I've had my assembled board for around 2 years now and haven't installed it yet! Your info has given me the impetus to get on with it at last. I have a couple of questions though: Did you mak...

Flossie, whereabouts are you? I'd be interested in having a look at your installation. Do you mean you took the rim off the crank pulley and turned it to face the other way? Or turned the whole pulley round? What type of fan have you got? Photos would help I think, unless you live round the corner! ...

This is speculation, but EDIS 6 might have been fitted to Scorpio V6 and/or early Mondeo V6. I can't think of any V8 Fords sold in the UK.

By the way, where did you get your case from?

David

I've just about finished assembling the components onto the board and I've checked for 5V and ground at the appropriate points. Out of curiosity I started probing the other pins on the IC sockets. Can anyone tell me what I should find at the other pins? In particular, I get 4.5V at pin 13 on the pro...

mdh, have you ordered your parts yet? I've been trying to find a suitable case for the MJLJ and can't find anything in the UK. Are you ordering your components from Digikey? If so, I would get a Heeger EAF case from them. If you do go down this route, can you order one for me too please, and I'll so...

I spent quite a bit of time looking into getting stuff from RS/Maplin/Farnell, but got it all from Digikey US in the end. There were several reasons for this: First none of the UK suppliers stock the Motorola pressure sensor, and although you could use a different sensor, the pins would not line up ...