Autosport Labs

All FIXED! It turned out to be a dodgy screened wire from edis to MJ it was shorting to the shielding.

A big thank you for your help.

Have tryed the edis off my other car and no different. anymore ideas? Is it possible it could be the prosessor?

Hi brent. I have checked over my wiring and it is ok. The edis was removed from a working car so it should be ok but I can try borrow another one. I don't think I was very clear about what I had tested in the MJ, If I just power up the MJ nothing else wired up and the RS232 (U2) removed I can measur...

Thank you for your responce. I have tryed removing the rs232 and the signal is ok, but when i done it I could measure 4v coming out of the input on the prosessor. The unit was brought from someone unused, but he brought it built. There is a sticker on the back of the unit that has an email address f...

yes I had read something about that on the forum, I need to find out why the MJ is killing the pip voltage, could it be a faulty processor?

Hi I have a V3 unit but when I connect the pip wire to the MJ the voltage disapears. The edis is putting out 12v ign on and about 6v engine running as it should when not conected to the MJ. I have replaced the rs232 and no difference, In the configurator the rpm always reads about 500rpm. I was chec...