Autosport Labs

Hi Spockie-Tech, I got that engine running now.... :D Guess what.... I opened the EDIS plug and found out, that the order of the pins was ok as it looked from the outside, but I had pushed in the ground and 12V pins with 1 pin offset. My ground and 12V readings were ok then, sVR signal as mentioned ...

Hi Spockie tech, thanks a lot for your quick reply. As you mentioned is measured the coil already yesterday. Middle pin 2 to left and middle pin to right 3 have the same restistance and pin 1 to pin 3 have the double resistance. This for the middle pin N° 2 must be the 12V +. I changed pin 1 and 3 o...

Hi Douplegarage... If you use the old 1300/1600 intake manifold and a waterpump with 2 hose connection you can bolt on the original alpha TPSon the right side of the front carb. Only suitable for Weber and Dellorto btw. You can get this item at. www. dellorto.uk As soon as my system is running I wil...

Hello first of all! I installed the megajolt/EDIS system to an Alfa Romeo 105 Nord engine on a test stand and it worked out perfectly, usingthe following parts: original Ford fiesta Ignition cables and VR sensor(angled version), trigger wheels 36 tooths, original Ford coil. Then I installed a duplic...