Autosport Labs

Managed to get v3.0.0 working, i was right clicking the link, hitting save as and then trying to install it off my start menu with no joy. It worked that way with all the other ones, but this morning i tried just clicking run on the link and its installed straight away lol :oops: What a turnip. Will...

Right had another hour at it today with no success, downloaded that v3.0.0 you linked brent but it says the file is corrupted and wont open? Anyway i think i've basically tried every programme from the v2 downloads page and nothing so far has linked up with the megajolt :( What other programme shoul...

Thankyou brentp, i've downloaded that v3.0.0.. Gonna try again shortly. As said i think the mj is definatley working, as it definatley doesent seem in limp mode and it limits really early at 5500 when the zetecs make peak power at around 7000. Will have another day at it and if im not getting anywhe...

Thankyou brent i'll try again tomorro.. Could it be the cable? Its the one that came with my friends emerald system, should imagine it will work the same?

Cheers for all your help

Hello, It is likely that you have the original firmware on your V2 controller. You should try the version 3.0.0 software for the V2 controller (V2 and V3 shared the same protocol and similar firmware design) Downloadable from this page: http://www.autosportlabs.net/MJLJ_V2_Downloads (direct link) h...

There is a test to prove you are getting comms at least between the computer and your megajolt unit without the need for any software. This will require you removing the processor chip from the board and linking 2 pins together on the IC (Integrated Circuit) socket. Then using hyperterminal you sho...

Tried that v2.0.3 and still nothing.

Can not get any of the controller software to link up to my megajolt

Thankyou mate much appreciated. Managed to download it. Can anyone confirm for my megajolt v.2.0.1, I would need the controller software v2.0.3 that i've just downloaded? Waiting for my friend to bring up the cable so i can try again. Fingers crossed, annoying having the limiter set at 5500rpm when ...

[quote="NITROPIXIE"]I would say you were using the correct software. I think Brent would be the person to answer this one though as i do not have much experience with V2 megajolts. Looking on this page http://www.autosportlabs.net/MJLJ_V2_Downloads which is the one you were looking at. The...

A little help needed please, recently bought a car running carbed zetec with megajolt. Never recieved any disk with car for megajolt, ive took unit apart and inside it says v2.0.1. Ive tried downloading the software on the laptop but its not reading anything when its plugged in and cars running etc....