Autosport Labs

no worries dude.
haven't tried the other 'user-definable outputs'. just strange how there's constant power
i'll try them today though
cheers

any ideas?

Hi, i've wired up the shift light correctly, to the MJLJ, comes on at 7k rpm... The only problem is, the light/LED is constantly on, it just goes brighter when the shift light is suppose to kick in (at 7k rpm...). The LED bulb is just a standard one from Maplins (big UK electronics store), 12v. Do i...

it now works
i had wired it up wrong too, and the rpm was set at 7000, now at 6000, but i'm going to lower it again

thanks alot for your help guys

It's easy - on the ignition map page (the table of numbers) there are 3 tabs. Haven't got it in front of me but click one of them and there is a box clearly marked to set the shift light and limit RPMs ahh nice one, found it, just need to plug it in, and check what mine is. haven't got the lead or ...

From what I understand, you wire a single shift light up as follows: 1) connect one end to a 12V source 2) connect the other end to the dedicated shift light pin on the MJLJ connector 3) set the shift light RPM in the software and flash to the controller ahh thats where i'm going wrong then :roll: ...

Here's the section in the installation guide that talks about installing a shift light: http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide#User_Defined_Outputs_and_Shift_Light Let us know if you have any specific questions! firstly, thanks for the reply :D Thats the guide i've been loo...

hi,
how do i go about putting a shift light onto my megajolt jnr?
i've read the guide on here, but can't understand it
thanks, jimmy