Autosport Labs

Cheers, thanks for clearing that up

So, just to confirm, this feature enables two maps to be saved on the MJ box, and accessed via a switch. To load the maps I write one, then commit it to flash. I then write another, and commit it to flash as well. Then both maps are saved on the box, and flicking the switch will swap between them. I...

I am trying to set up dual configerations on my megajolt, but i can't get it to work. I have enabled it in the controller options, and wired in the switch, but I can't see how i can access the two maps? I have tried writing one and commiting to flash, then writing another and commiting to flash but ...

Bit of an update, after a bit of rumaging aroud i found out how to enable dual configs, but now cant see how I save 2 maps to the box?

Hi, just read through the V3 installation instructions, in regards to the option switch wiring you linked me too: "For the option switch, you can find the wiring information here: http://autosportlabs.net/MJLJ_V3_vehicle_installation_guide#Enabling_Option_Switch_.28For_MJLJ_firmware_.3E_3.1.0.2...

Sorry for the late reply, Its all working! Turns out the Megajolt didn't have a good power source, hence why the computer couldn't see it, as it wasn't on! Cable (Serial to USB off amazon) works fine, and I would recommend as it was only £3 or so As for the option switch, I'm not sure there is a pin...

Perfect, thanks for that.

I'll let you know how i get one once i've had a look at it later in the week.

Cheers,

Mike

Just another quick question, is there an option switch pin on the 14pin molex plug on my megajolt? I can't seem to mind a wiring diagram for it here on the website.

Okay, I've heard that before, was hoping a proper cable rather than an eBay one would solve it, but maybe not. I don't, no, but I'm fairly sure my parents will have one in their loft somewhere... Thats good, I'll give it another shot today out of the car to see if it makes any difference.. Thanks fo...

Ahh, just found which port the usb is on, and now have 'Timeout reading cylinder count' at the bottom.

Just out of interest, does the megajolt have to be plugged in for it to be working? or can i take it out the car and sit in the warm and try and get it to work?

I am one of many by the looks of things, who can't get the box to talk to the laptop. I have Megajolt Lite JR, no idea which version, as it was bought off someone else, any way of telling? I have a laptop running vista, and a serial-to-usb cable from amazon, and some Prolific software my computer do...