I want to reinstall the Firmware but was unsure of which version I need. Here's an image of my board, any ideas?
Search found 17 matches
- Mon Apr 18, 2016 6:20 pm
- Forum: Q&A
- Topic: Which Firmware Version do I need?
- Replies: 1
- Views: 5349
- Wed Apr 13, 2016 9:10 pm
- Forum: Sensors
- Topic: TPS Sensor on SU Carbs
- Replies: 0
- Views: 9754
TPS Sensor on SU Carbs
Has anyone fitted a TPS sensor to their twin SU HS2 or HS4 carbs? If so, how did you do it?
Thanks
Thanks
- Wed Apr 13, 2016 1:21 pm
- Forum: Installation
- Topic: MJ Lite Jr - Timing Issues
- Replies: 1
- Views: 9970
MJ Lite Jr - Timing Issues
So I have had my MJ up and running for a couple of years on my 4cyl Triumph. The car has been on the rolling road this morning and that has highlighted a problem with timing advance. Plug in the laptop and the timing advance appears to be altering with revs & load as you'd expect, but a conventi...
- Tue Oct 20, 2015 6:31 pm
- Forum: Q&A
- Topic: 1st Gen Coil Pack Output
- Replies: 3
- Views: 4957
- Wed Aug 05, 2015 6:25 pm
- Forum: Q&A
- Topic: 1st Gen Coil Pack Output
- Replies: 3
- Views: 4957
1st Gen Coil Pack Output
Anyone know what the Kv output of a 1st Gen Coil Pack is?
Plus, has anyone used Iridium plugs with them successfully?
Plus, has anyone used Iridium plugs with them successfully?
- Mon Jun 15, 2015 6:56 am
- Forum: Q&A
- Topic: MAP Connection
- Replies: 2
- Views: 4195
- Sun Jun 07, 2015 9:00 pm
- Forum: Q&A
- Topic: MAP Connection
- Replies: 2
- Views: 4195
MAP Connection
On a recent Rolling Road session the guy working on my car moved the MAP sensor tube from a take-off on the inlet manifold and put it on the vacuum connection on one of the carbs. I questioned this as MJ installation instructions says not to use the carb connection, he said in his experience it work...
- Tue Jun 02, 2015 9:17 pm
- Forum: Q&A
- Topic: Megajolt/E - COP
- Replies: 1
- Views: 3856
Megajolt/E - COP
Does the Megajolt/E support COP?
If so, is there any real benefit over the standard 1st & 2nd gen Ford Coil Packs?
If so, is there any real benefit over the standard 1st & 2nd gen Ford Coil Packs?
- Thu Oct 16, 2014 3:34 pm
- Forum: Installation
- Topic: Coolant Temp Sensor - Aux Input
- Replies: 1
- Views: 5098
Coolant Temp Sensor - Aux Input
I want to start using the advance correction part of my MJ ECU, I have fitted a standard GM Style Coolant Temperature Sensor. These are the values as provided by the suppler of the sensor. 2 Celsius = 4000 ohm 74 Celsius = 362 ohm 94 Celsius = 212 ohm To be honest I don't really understand or know h...
- Fri Sep 13, 2013 5:49 am
- Forum: Installation
- Topic: Cable Shielding Connection
- Replies: 1
- Views: 4770
Cable Shielding Connection
I've had most of my installation in place for some time, all but the MJ ECU. I used the wiring diagrams from the Autosport Labs website to get to the point where the car will run in limp mode. I have just received the MJ ECU from Trigger Wheels and reading through their installation instructions the...
- Sun Jul 28, 2013 6:19 am
- Forum: Installation
- Topic: First Test - No Spark
- Replies: 9
- Views: 9074
- Thu Jul 11, 2013 10:25 pm
- Forum: Installation
- Topic: First Test - No Spark
- Replies: 9
- Views: 9074
New Crank Sensor fitted and I now have a healthy spark on all 4 plugs whilst cranking, but absolutely no sign of the engine firing. I have the missing tooth of the trigger wheel at TDC on the pulley and the sensor 90deg anti-cw as seen in the image below, (taken before then engine was fitted). http:...
- Thu Jul 04, 2013 10:57 pm
- Forum: Installation
- Topic: First Test - No Spark
- Replies: 9
- Views: 9074
- Fri Jun 28, 2013 9:00 pm
- Forum: Installation
- Topic: First Test - No Spark
- Replies: 9
- Views: 9074
- Thu Jun 27, 2013 5:41 pm
- Forum: Installation
- Topic: First Test - No Spark
- Replies: 9
- Views: 9074
First Test - No Spark
I now have all the bits (except the MJ ECU) for my first megajolt installation and thought I'd try it out by getting the car going in limp mode, however I have no spark at all. Initially I thought it would be a wiring error, but have checked & rechecked everything, this did highlight I had termi...