Autosport Labs

Thanks for the reply Daniel unfortunately the gauges and the map doesn't register I am fair,ly certain it's taking and using the map but cannot conclusively say. Funny though I have 2 the same but tried 2 computers on 2 mega jolts with the same problem. I've tried contacting the manufacturers but th...

Hmm no response anyone else help?

Mick

Email sent

Hi still having this problem. It will accept a program and save it and I guess it uses it because the timing does change . I am having other problems with the car so I could do wit it working right is there anyone who vcan check and repair these units?

Mick

Anyone have any idea?

Mick

I'm not a massive expert on this system but I would have thought you cannot run edis 6 on a 4 cylinder, the edis fires in pairs so when it fires the last 2 you wont have a spark to your engine.

Mick

Hi Brent I have done what you asked and the videos are here http://youtu.be/UrAYpKKz0Fc http://youtu.be/pPNcy7lB6OU Yes it shows the configuration on. No with pressure (Vac) It shows nothing on the screen. Help and about responds fine with configuration and controller version. Left for 5mins and did...

Hi Brent that is sat on the bench with a 9v battery. I have done a loop test as I was advised on another forum from the processor socket (with processor removed) and it comunicated with the computor fine.

Mick

Hi all still having problems the when I click on help and about it shows megajolt lite jr configuration 4.02 and MJLJ controller V4.02. I have tried the loop back test on the serial port and its fine. With the megajolt switched off the car runs a 10 tdc. with the megajolt on the timing is variable w...

Well tried it with a different computor and a usb serial converter from maplins, I had the megajolt on a battery and its exactly the same. So I am either doing somthing very wrong or the lead from the megajolt is o/o/o I have tsted and the connected pins test through with a multimeter okay, or I hav...

Its set up to read the program on the mega squirt on start up. If I start it with the ignition off there are zeros in the boxes.

Mick

PS anyone have a link for a USB converter that will work

Hi thanks for the replies guys. I have had another look today, the megajolt is working okay when revved the timing advances as shown by a timing light. I can load a map and the second map can be downloaded too. It is definitely has no warning messages I have attached a pic of it when the engine is r...

Hmm anyone make a guess

Mick

Hi All I did a search but did not find anything on my problem. I installed the megajolt trigger wheel and mounted the coil packs checked it run and it was fine at 10 deg. I loosely installed the megajolt and it worked fine communicated with the computer all okay. I then installed it neatly and now i...