Autosport Labs

The "battery voltage" is the voltage seen at the RCP with the motor off (alternator off). Once the car it running, the voltage at the RCP is voltage of the system with the alternator running. Regardless, voltage at the battery should be same as the voltage at the RCP.

I can't seem to get the RCP to even initialize the can module. Is there some other step I need to do here?

So I got everything plugged in but the MK1 software doesn't seem to have a tab for mapping. Is there something I'm missing here?

I ended up using the hammond 1551HFLBK. With a little bit of trimming it fits like a glove. I can't take the credit for all of this though. A friend helped out with this project. I'll see if I can embed the pics from google. https://photos.app.goo.gl/krLuwep4bTvh7ixE6 https://photos.app.goo.gl/XTzxG...

What is the suggested part number for the terminal block connector the RCP MK1?

Most modern cars use some form of load detection. I'm most familiar with the honda setup. 88-01 civics have a little unit in the fuse box under the hood. The factory setup outputs a 0-5v to the ECU to control the alternator to adjust for the load. I currently have a standalone in one of my cars that...

Thanks Brent,

I have a friend helping me put a few of these together.

Is there a recommended enclosure for it?

Are the OBDII can mapping channels standardized for things like TPS, Coolant, MAP... ?


In this example how would I know what can channel to look for TPS on?
TPS OBD_CAN ---> LEGACY ADAPTER ---> KLINE OBDII TPS ---> LEGACY ADAPTER ---> TPS OBD_CAN


Sorry if this is beginner stuff here

Bump,

Anyone have these files still?

Working on a 2002 toyota MR2. It doesn't have a traditional can bus and the OBDII uses the older 9141 K line single wire. I'd like to use the legacy OBDII adapter to convert a few channels of information to traditional can. How does the legacy OBDII adapter work exactly? Would I be able to use it wi...

I was lurking around and came across this post and wanted to point out that since 2016, many oems and remans have started using the 4.9 style sensor so they are abundant. There are many different wiring lengths to choose from. I've actually had better luck with the Desno 4.9 sensor in place of the t...

Sorry to revive a dead thread... Is the circuit board layout and BOM still available for the canx? The Github link only has firmware in it. I have an original Race Capture Pro MK1 and would like to start using the can features on it but never purchased the can board when I got the Race Capture. If t...

Sorry about that, I guess it wasn't very clear now that I went back and looked at it. It's stock 1974 460 longblock (D3VE) except cam has been advanced from stock to put it's timing where it was in the late 1960's. Carb is holley 750 vac secondary. I think Ford had spec'd compression in the 70's at ...

The engine seems to like this a lot. I'm sure it's no where near perfect but there is no ping and it makes more torque in first gear than the tires (tire) can handle.

No problem.