Autosport Labs

UPDATE: I have a simple setup where two replay xd1080 cameras are powered by the 5v reference output with the grounds going through two of the GPIO channels. I have tested that on the car in my shop and it seems to work like a charm. Have not tried it on the track yet, but I don't see why it would h...

Tried a simple test today. Hooked up a VOM to a Gpio channel configured as output. When I set that channel to "1", I indeed get the expected 12V... but when I set it to "0", I still get about 7V... according to the docs, it should be an open circuit... why do I still see voltage?

The Replay xd1080 video camera has a feature that will turn it on and start recording whenever external power is applied. I'd like to control it using my RCP MKII, but the camera requires 5V and (I think) 500mA or above. I think this rules out the analog outputs which provide only 50mA (right?). Has...

Also, one of the pages of the app is "blank"... the one just "to the right" of the guage page.

I have mapped an RPM CAN signal to a virtual channel. I see the RPM on the RCP App on my laptop, but not in the Android app over BT.

What am I missing? Do virtual channels not broadcast over BT or something?

Thanks so much for the tips. It seems like the session starts up, but neither "enter" or viewLog produce any output. Will be back on this tomorrow. I was able to sort out RPM mapping using the app, so I might just use the same approach for temp and pressure to get going. I have a race in a...

Yep, did all that with Indigo and it seemed to start up a session but getting no data back from viewLog. Will try putty to see if that works better. Thanks so much for the pointers! In the mean time, I think I figured out the RPM channel. The CAN IDs that the EC2 is emitting don't match what is in t...

No joy using Indigo as the terminal emulator. Which protocol and serial configuration does it require?

Thanks! Will try to find the right termanal emulator and give it a whirl.

Sorry for the dumb question, but I can't find where my print statements in Lua are being logged to. I see them in the scripting part of the RCP app (you really need to make the script section of that scroll BTW). But they aren't being written to my SD card AFAIK. I'm trying to log a bunch of raw CAN...

I am upgrading to the Mk2, so putting my Mk1 and Telemetry unit up for sale. $250 obo for both.

Both are used, but in like new condition with the fuzzy side of Velcro attached (removable if you prefer). I used them over the last couple of seasons in a race car and they work great.

Thanks!
Wayne

Can I get dimensions for this dash? I'm just finishing up a new dash for my race car and if this is close enough to completion, I might want to take dimensions into consideration so I can incorporate this into my dash to replace the android device I'm currently designing around.

Thanks!
Wayne

Can I get dimensions for this dash? I'm just finishing up a new dash for my race car and if this is close enough to completion, I might want to take dimensions into consideration so I can incorporate this into my dash to replace the android device I'm currently designing around.

Thanks!
Wayne

Here are a few shots of the car... one at the track last season, one of the current state of my frame-up rebuild, and one of the current wheel and dash setup. The big open space on the dash is for an unlocked Sony Experia phone on which to run the RCP dash app. The red shift light in the middle and ...

Thanks Ryan. Let me make sure I understand, are you saying that the Mk1 telemetry unit will not work at all with the Mk2 RCP, or just that it can't work simultaneously with the Bluetooth module? This is a dedicated spec racer, and I've designed my new dash around an android device that will be runni...