Autosport Labs

Hi Brent,

Thanks for your reply and email!

The MJ is functioning well.. A few months ago I tested the car/engine on a dyno. I think the curve is still the same as I loaded the first time (before I installed the rev-limiter) http://www.youtube.com/watch?v=4agiRTFxA4M

Roland

Brent,

Still have this problem with my Megajolt.. What could you do to solve this problem? The engine is still running fine, but I can't get any connection with the MJ to change a map of set the rev-limiter..

Thanks in advance.

Hi Brent, The USB - serial adapter is showing up in the device manager. But right now I'm using a computer with a direct serial port. I tested the serial to RJ11 cable adapter. It's working ok! I use the configuration you mentioned and connected through HyperTerminal. When I type, I can see the para...

Brent please take a look @pictures; http://www.miniprojects.nl/megajolt/bench.jpg http://www.miniprojects.nl/megajolt/screenshot.jpg Tried 3 different laptops, 2 with USB - serial converter, 1 with serial port directly on the computer. Still no connection.. I'm desperate.. Engine is running well, I ...

Blue-yellow: PIP Blue-red: SAW Green: Rev-counter Brown: GRND Black: 12V (from ignition switch) The coilpack is powered by the same wire as the MJ. For me it's clear this should be connected to the Coilpack Power connection on the Molex connector when the REV limiter is installed. I'll do that if yo...

- If you turn your ignition key to "on" without running engine, can you communicate with the Megajolt? No I can't.. Tested several laptops. Comports are working ok. Strange, cause engine is running on the MJ. - Where do you have the center +12v connection of your coil pack connected? With ...

MJ V4 (Megajolt /E) I wired up the Rev limiter internally.. Used the Autosportlabs website as guide. Everything was simple and clear.. just connecting the solder pads to each other. Do I have to connect the EDIS coil to "coil power" on to the plug? The engine is still running without this ...