Autosport Labs

Hi Mark, if you look at the manual that you posted, there are instructions how to wire the Omex for twin coil operation. In my opinion, this should work. It makes sense that they say that you need to set the number of cylinders to 2 instead of 4 since this is a wasted spark installation, so the coil...

Next on the agenda was to build a bracket for the VR-sensor. First I had to find a convenient place on the engine block where I could install the bracket without too much hassle. I had a look at the Weber crank TDC trigger kit. This mounts nicely near the TDC marker on the engine block, so I decided...

Some more progress... Instead of using a universal trigger wheel that bolts to the original pulley of the x-flow, I decided to get a machined pulley that has the trigger wheel built in. I have sourced it from QED Motorsport. It is the Lotus Twincam crank pulley with the 36 teeth machined in. https:/...

Hey gnulpt, Im trying to do the same to my escort with a 2 ltr pinto. how difficult is this system to instal where do you even start? any info will be appreciated. Thanks G'day Ramo! Sorry for the late reply. The install should be pretty straight forward. There are a lot of projects around where yo...

I am using the Megajolt with internal hard rev limiter. In this installation, the coil power is routed through the hard rev limiter and is connected to pin 16 of the Megajolt connector. Unfortnately, that means that one can not simply disconnect the Megajolt and run the EDIS in limp mode since disco...

Hi, there is a very interesting group on yahoo that deals with tuning the DCOE.... Have a look... http://autos.groups.yahoo.com/group/sidedraft_central/ There is a lot of useful information. Unfortunately a lot to read through since Yahoo Groups is not very user friendly... But people are very frien...

For the throttle position sensor, I went down the easy route and got a Weber Alpha DCOE kit. Really easy to install, just a 15 minute job. Here is an overview of the kit... http://farm3.staticflickr.com/2813/9152716871_206cbebf02.jpg Brackets installed... http://farm8.staticflickr.com/7446/915494519...

So we get started by stripping the engine. Of course the distributor was removed... But now an ugly hole is in the block. So I needed a blanking plug. There are many on the market but I ordered mine from Trigger Wheels when I also ordered the Megajolt from them. You need to get the 27mm A+ series ty...

Dear Brent, so I tried and started in Safe Mode. The tuning view came up correctly. That meant that I had a driver problem. After fiddling around with Parallels Desktop 7 on my Mac, I gave in and updated to Parallels 8. It still did not work, but after playing around with the settings of my Windows ...

Hi community, I am currently installing the Megajolt in my X-Flow powered Caterham 7. The engine is a 1700 Ford X-Flow with a Kent 244 cam running on dual Weber DCOE 45s. Here is a shot of the car while it was still running.... 8) http://farm4.staticflickr.com/3723/9133740115_1ef769aef4.jpg Caterham...

Hi,

I am looking for a TPS map for a

Ford X-Flow 1700

Preferably on Kent 244 Cam

Engine is running on dual Weber DCOE 45s.

I am currently converting my Caterham 7 to Megajolt.

Thanks

Klaus

Hi, just starting to play with the Configuration Tool. I found a problem with the Tuning Perspective (F4). When I load a map and switch to Tuning Perspective (F4), I get a black screen with a bouncing red/yellow ball... (see attachment). When I click and drag in the view, the map becomes visible. So...