Autosport Labs

I agree the led failure was weird. I don't really know what was going on there. So, I think I mostly figured out what was going on. I was setting up a potentiometer based steering sensor. I was using a 10 turn pot which is way more than the 3 turns the steering wheel does, so when I did the scaling ...

Well, replaced the power status led and that is functional again. The data files still seem to weird. I'll update when i get a chance to play with it some more.

well, i have an update. looks like the power led has failed. I can touch an external led to the bottom pins and it reacts as expected (Solid on with power). I'm not sure if this is a cause or a symptom. I probed around a punch and everything that is labeled 5v on the schematics seems to be getting 5...

So, I found the schematic for the board and had a poke around. It looks like the 5v and 3v supply is spot on. There must be something else wrong. Either on 12v or the USB power the power light flashes erratically and all sorts of weird things are happening within the logging. I can communicate with ...

All of the sudden by board seems to be having a problem with getting power from my 12v input. When connected to the 12v my power light blinks and flashes and dims in no particular pattern. The board sort of works when in this state. It will log to the SD card sometimes. I can plug in into the pc and...

I thought I would post this in case anyone else was having a similar issue as I was experiencing with my carbureted Ford Festiva. I am setting up the datalogger with a Coilx to record the RPM. I am hooking it up to a Gr/Y wire that comes off of the negative side of the Coil and is labeled the RPM si...

I am wondering the same thing. What do the "read", "write", and "run" buttons do?