Autosport Labs

http://www.apriliaforum.com/forums/attachment.php?attachmentid=184092&stc=1&thumb=1&d=1329856149 The LS2 coils have 4 pins; PIN D is the 12V supply that is connected to the primary winding PIN C is the signal input for the internal transistor PIN B is the ECU return signal that can be r...

The motor is going in within the month and the ignition will need to be setup within 3months maximum, I'm not sure if the mj2 will be available by then.. I might have to go mega squirt.

Do the coils HAVE to be fired by the ignitors?

So I'm a bit confused, maybe someone can help me out. http://www.autosportlabs.net/images/4/4a/Dual_primaries_current_annotated_resized.jpg If I'm reading this correctly, the EDIS coils fire at 12v? and the EDIS controller supplies 5ms dwell if a single coil is used per channel? that seems like it w...

Yeah, I know it was probably the Oring on the dizzy, but this sort of eliminates it from happening in future and also it's something different, there is literally nothing left stock in this motor, I've spent way too much money on it, but all for my own reasons, and an EDIS setup is rather inexpensiv...

Hi, thanks for the reply. The reason I was going DIS was because in the past the motor would die, just at the sight of water, it was as if the dizzy liked to absorb any moisture it could find and the current wouldn't jump the gap between the rotor and cap. I'm looking at the easiest and cheapest sol...

Sorry to drag up old threads, but I'm currently building a 22r and was planning on running EDIS, any updates or advice?

OK, first post, I'm new to this, be gentle.. I have a 4cyl Toyota 22R that I'm hoping to run CnP LS2 coils.. It would be great if the mega jolt 2 was out but for now I'm seeing what I can do. I have seen on youtube there is a guy running dual EDIS for CoP set up. Where 1 EDIS runs cyl 1 and 2 while ...