Autosport Labs

Hi, On the heels of our latest release, (https://www.autosportlabs.com/racecapture-app-1-12-0-firmware-2-13-0-available/) we are in the position to dramatically improve analysis features for RaceCapture/Podium so we can offer a suite of useful feature that makes RaceCapture and Podium a fully stand...

Much to my dismay, the free versions of Motec i2, AEMData, and GEMS DataAnalysis all require the data be in a proprietary format other than CSV. As such, the ability to use alternative data analysis software is contingent upon a conversion, either the no longer available GEMS DLOG99 or a bespoke co...

Great info - when you get a good collection of sensors figured out, please let us know and we can include it in the list of presets! https://www.autosportlabs.com/racecapture-app-1-12-0-firmware-2-13-0-available/ I actually k-swapped the car so I'm back to square one with a 2006 TSX ECU. Hoping to ...

Ok so I think I have got this solved. I shrunk the volume on the SD card to below 32GB and then formatted with Fat32. Now I seem to be logging.

Does this mean we are limited to 32GB SD cards? Is that something that will be updated in the future through firmware?

Hi guys, I've read through various threads on this subject and none of the suggested solutions have solved my issue. My current configuration has just the default Lua script and nothing else, various channels etc. But I'm not getting anything logged to the SD card. My SD card is a 128GB card formatt...

So I have now got some CAN data over OBD2 logging, so I'm plugging the RCP into the OBD2 port as well as the regular hardwired switched powersource. My problem is that the OBD2 port appears to always be powered, so the only way to turn off RCP is to disconnect it from OBD. I know that I'll forget to...

So I'm looking at wiring the shiftX2 to my RCPMK3. The shift light is going to be mounted to the dash (duh) and the RCP unit is behind the seats in the car. My thought is to get some CAT5 cable and solder that to the pigtail on the SX2 and then on the other end wire directly into the CAN bus connect...

Hi, A quick way is to log all of the raw data and watch for that particular CAN message. Use the CAN logging script we have to dump the CAN data to the log file: https://wiki.autosportlabs.com/CAN_Bus_logger If you vary the sensors (TPS, etc) and see the data moving in the raw data, then you can sp...

So I have a little bit of CAN logging working with my S2000 based on a tiny bit of information I found on HondaTech. So far I have TPS, Steering Angle, and Coolant Temp logging. I want to get brake pressure working too but I can't figure it out yet. Below is the info that I found: I was able to reco...