Autosport Labs

hi paul, the pocket c files on my web site are intended for pocket pc's (windows) only i'm afraid - unfortunately the programming languages are slightly different between palm and pocket pc's so the application wont work on your palm.
ps. tuned my imp with these programs too!
cheers
david

sorry, i haven't found time this week, i guess it'll get done eventually....

i may have a look at doing the rest of the features this week, will post on here if i get chance to do them... i've just been sidetracked writing injection programs for megasquirt too!

hi josh, again, it's another of those things i don't think i'll get round to... theoretically you shouldn't have to change your rev limit that often so I didn't bother doing it!

yes it should be fine, all that'll happen is that the 'number of cylinders' box will tell you that you have 6 or 8 cylinders.... if you need to actually change the number of cyls, you'll have to connect up to your desktop, but as you should only need to do this once (unless you do a engine transplan...

unfortunately i have never got round to properly implenting that josh; all it tells you is how many cylinders your engine has (when connected to the mjlj!). you can't change the no. of cylinders yet.
very useful if you forget what engine is in your car of course

well i'm going to be bold here and say that the serial port of the dell <i>will</i> work with the mjlj!! I am sure problems will only occur if you solder the cable up with the wires in the wrong places etc.... just take your time double checking as you go (same with anything really). By the way, I b...

good point, although I did accidentally reverse the connection (RX/TX) on my ipaq when building my cable, but it didn't cause any problems!
i'm 99% sure that you just need a custom cable and no other soldering though.

I'm still not sure about that Jax2a... serial ports are serial ports surely! RS232 is a 'standard' system so it seems unlikely that Dell would do their own thing and have other voltage levels. But you've got it going and thats the main thing; good work on testing off the car though, I may see about ...

i would have thought so. Check it has an operting system that will work with the PocketC runtime (listed here.... http://www.orbworks.com/pcce/download.html) and also it must have a serial connection (just google for the pinout of the PDA) it should have some pins labelled 'serial TX' and 'serial RX...

the HP Ipaq 4150 is brill, wireless lan and bluetooth, my friend has one, it works with my software and he runs GPS on it too.... that said, I'm pretty sure the cheaper models (right down to the 1900's etc) which you can get on ebay for fifty quid will cope with it too. i've got a 4350, which is a 4...

hi josh, i'm not planning to do it; i already can! i have tuned the ignition map on my dads austin healey sprite (with MJLJ) from scratch using nothing but the pocket pc software shown on the site. some constants (eg. number of cylinders) you will still have to set using your desktop, but it's a lot...

check out my site:

http://ipaqsparker.tripod.com

david

http://ipaqsparker.tripod.com/

My website (above) has a pocket pc tuning application.

David

http://ipaqsparker.tripod.com/ My website (above) has a pocket pc tuning application free for download - it's all been tested on the car and works fine, I have recently made some changes so you can see which 'box' in the map you are currently running in, which makes tuning very easy - I can upload t...