Autosport Labs

Baud rate update appears to have fixed it. CAN2 was originally at 500 so that seems to have sorted it out. Thanks for the help

Now I need to do some reading to figure out how to get the side buttons on the ShiftX3 to scroll the pages on the app.

Hey Brent, All plug n play. Can1/2 Port - > Can Splitter ->CAN A cable to ODB2 Legacy adaptor (pulling data and functioning, and providing power to RCP) ->CANB -> Inline Terminator -> Shift X3 Wrote it out because the pictures are hard to see through the windshield. https://www.dropbox.com/scl/fi/gd...

Hey team, Have a Pro Mk4 with the Shift X3 wired into Can2. This is the only CAN device running. Data is being pulled via ODB2 (legacy adaptor) from a 2003 infiniti g35 I have RPM setup as a CAN channel - though honestly not sure if I need that. RPM pulls into RCP - shows up on the dash but the Shif...

Making progress: Did the firmware update again, power cycled. SIM is now recognized Phone number shows up Says marginal signal strength but when i put it in my phone it's full 3g bars... New Info Script: [USB] Stopping telem stream on USB [USB] Starting telem stream on USB [USB] Stopping telem strea...

Making progress: Did the firmware update again, power cycled. SIM is now recognized Phone number shows up Says marginal signal strength but when i put it in my phone it's full 3g bars... New Info Script: [USB] Stopping telem stream on USB [USB] Starting telem stream on USB [USB] Stopping telem strea...

Where it currently is has full bars of 3G service.

I am now using Chatr which is Rogers pay as you go service
APN is chatrweb.apn

Error scripting is as follows: *** RaceCapture/Pro MK2 2.17.8 *** [watchdog] Initializing... sizeof LoggerConfig: 10296 [CAN device] Initializing CAN0 with baud rate 500000 [CAN device] CAN init success! [CAN device] Initializing CAN1 with baud rate 500000 [CAN device] CAN init success! IMU: init re...

Hey Everyone, I have a RCP MK2 that we've had for years and worked well but this year, went to start it up with a new sim and we do not get any cellular/telemetry status light (not lit up). We were trying some things with a telus SIM - that's a no go but the setup we now have is: Latest firmware off...

Think I figured out the answer is No, telus does not work. The unit does not recognize the sim card, can't initialize or read the phone number.

We have our RCP wired direct (fused and switched) separate from ignition. That way during fuelling we do not lose signal and have to go through a reboot and restart logging etc. Works well for us.

Canadian Racers, Has anyone had success using Telus for the RCP MkII telemetry? When we first bought the RCP, Telus was only CDMA which from what I recall RCP couldnt use. In the years since, Telus upgraded to GSM network. We are working through troubleshooting the cellular side but am wondering if ...

Is there any concern using one of the I/O slots on the SensorX breakout board to feed the CoilX chip 5V power, RCP ground and the oulse input back to the RCP? In my head it should be no issue because the CoilX should have converted/conditioned the signal to be safe for the SensorX breakout board, bu...