Autosport Labs

Try this Driver link http://uk.computers.toshiba-europe.com/innovation/windows7_drivers.jsp?macId=&LNG=1&mode=allMachines&userOS=&action=&selCategory=2&selFamily=2&selSeries=312&selProduct=6013&selShortMod=-1&selOS=30&selType=all&country=8&language...

SORRY. Dont think you will find a cheap alternative in Norway, only the manual desoldering tool (pump). It is ok to use a pump if you can unfix all the pins from the IC package using a wire cutter and then remove them pin by pin using the pump and a small solder iron. I used a socket when my new IC ...

ELFA is the Norwegian (Swedish) alternative for these parts.

There is a shop in Oslo

ELFA
Sandakerveien 76F
0484 Oslo
Telefon: 800 81 135
Telefaks: 800 81 136
07.30–16.30 mandag–fredag

https://www1.elfa.se/elfa~no_no/b2b/start.do

My understanding on this is that the pickup need a ferro reluctor wheel to work properly

Bill is not selling MJLJ anymore. I got mine from Brent and it was a quick delivery.

Check this link, same job

http://www.jtccc.co.uk/index112.htm

Looks like a good source for Smiths rev counters

http://members.shaw.ca/tsmit/tachmod/tachmod0.html

http://www.cate1.co.uk/megajolt/mapping.php

Pinout for the DB9 and DB25 serial connectors

http://www.lammertbies.nl/comm/cable/RS-232.html#conv

You probably have an internal modem occupying com1, try to tweek this to another com port (com 2) and then run the MJLJ software.

Found this in my Megajolt folders, unknown source ???? 4 cylinder EDIS module pinout Signal EDIS Module Terminal PIP (EDIS output signal) Pin 1 IDM (diagnostic signal to ECU) Pin 2 SAW (ECU spark control signal) Pin 3 IGN GND (signal return) Pin 4 VRS - (crank sensor negative) Pin 5 VRS +(crank sens...

Try this, info looks good

http://homepage.ntlworld.com/steve_randle/
http://homepage.ntlworld.com/steve_rand ... mjlj_3.JPG
http://homepage.ntlworld.com/steve_rand ... EDISv3.GIF

Svein