For UK members

landy_andy · Post by **landy_andy** » Sun Nov 27, 2005 1:02 pm

Hi,

I have an account with RS Components and after checking, they hold stock off all components required to build your controller, this includes the MAP sensor. If there is enough inerested from UK members I could put a kit of parts together for a sensible price that'll save alot of messing around.

Cheers,
Andy

Oliver Sedlacek · Post by **Oliver Sedlacek** » Mon Nov 28, 2005 11:21 am

Andy,
Have you found the connector on RS? Could you post up the stock number.

Thanks

landy_andy · Post by **landy_andy** » Mon Nov 28, 2005 8:05 pm

Hi,

RS don't stock the exact Molex connector called for in the parts list, there closest match is 447-5931. It's part of the same range but doesn't have the chassis ears.

landy_andy · Post by **landy_andy** » Wed Dec 14, 2005 11:31 pm

Hi,

Have fitted the RS nearest equiv, and it looks & fits ok, just has a gap around it in the case as it doesn't have the 'ears'.

Cheers,
Andy

sairey · Post by **sairey** » Thu Dec 15, 2005 7:03 am

Hi Andy, yes, I could be interested.

rmaddock · Post by **rmaddock** » Fri Dec 16, 2005 1:33 pm

Hello,

I could be interested too. Looking at your username, are you thinking about this for a LandRover?

Let us know how much.

Robert.

AFRacing · Post by **AFRacing** » Fri Dec 16, 2005 5:09 pm

Hi,

I already supply kits and pre-built units in the UK and can supply just components if there is a demand.

Regards

Alex

AFRacing LTD - www.afracing.com

MartinM · Post by **MartinM** » Fri Dec 16, 2005 7:56 pm

Alex

Just had a look at your web pages. FYI, the KX8 doesn't have a SPI interface, so I'm not sure it can be classed as essential, and I'm keen to know how I wire an Air Intake Temp Sensor and a Coolant Temp Sensor into the MJLJ

AFRacing · Post by **AFRacing** » Fri Dec 16, 2005 10:38 pm

The power of copy and paste... those pages are nearly 2 years old now. I really must update them!

Alex

AFRacing LTD - www.afracing.com

Autosport Labs

For UK members

For UK members

RS stock numbers

RS connector

Hi,Have fitted the RS

Yep, Interested

Me too.

Hi,I already supply kits

FYI

The power of copy and