MK2 Hardware

Race Capture Pro hardware installation- power, wiring, physical installation, etc. See the dedicated forum for Sensor related topics

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
danieln
Posts: 1
Joined: Wed Nov 25, 2015 11:37 pm

MK2 Hardware

Post by danieln »

I love what you guys are doing here, and its valuable method of learning electronics and firmware development.

Are you guys going to release the STM32 based hardware schematics onto github? I see the original, But it would be interesting to see the changes made switching to the STM32.

I'm also interested in seeing more details of the STM32 CPU Module - https://www.autosportlabs.net/CPU_Module

Regards

stieg
Posts: 100
Joined: Fri Dec 20, 2013 1:37 am
Location: Madison, WI
Contact:

Post by stieg »

Hey Danieln,
Are you guys going to release the STM32 based hardware schematics onto github?
We have been talking about this internally. Its not super high on the priority list at the moment but its something we intend to address once life calms down a wee bit.
I'm also interested in seeing more details of the STM32 CPU Module
Yeah our wiki is a bit out of date. A similar CPU is the STM32F4Discrovery. You can find out more about the CPU by going to

http://www.st.com/web/catalog/tools/FM1 ... 252419.jsp

Hope that helps.
Andrew Stiegmann (Stieg)
Principal Engineer
Autosport Labs Inc.

Post Reply