New to the board and the whole MJLJ stuff. Got my board and ordered my Digikey parts - whats the best case to use? Thanks
Bob
Cases????
Moderators: JeffC, rdoherty, stieg, brentp
Hi, See the information at
Hi,
See the information at the bottom of the digi-key order page. It'll show where you can get a case.
http://picasso.org/mjlj/mjlj_parts_order.html
I'm also working on getting cases with end panels pre-punched..
Brent
See the information at the bottom of the digi-key order page. It'll show where you can get a case.
http://picasso.org/mjlj/mjlj_parts_order.html
I'm also working on getting cases with end panels pre-punched..
Brent
cases
Brent,
I work at a research place that has a cnc waterjet machine perfect for cutting the end panels. I would have to pay a very small amount to the shop for the grit used, but would be way cheaper than a machine shop could do it for. If you're interested, let me know and i'll see what it would cost for a mass production run of say 20-50 case ends. All i need is an autocad drawing of the end and i can stick it into the machine and bam!
Btw, i got my board and processor today. Thanks!
I work at a research place that has a cnc waterjet machine perfect for cutting the end panels. I would have to pay a very small amount to the shop for the grit used, but would be way cheaper than a machine shop could do it for. If you're interested, let me know and i'll see what it would cost for a mass production run of say 20-50 case ends. All i need is an autocad drawing of the end and i can stick it into the machine and bam!
Btw, i got my board and processor today. Thanks!
CNCed cases
Anymore word on the prepped cases. I would be interested in getting one... Let me know please..DarylP
Brent, I am ready to buy a ca
Brent, I am ready to buy a case. So If you are arranging a group buy of cases with pre-punched ends... Count me in!
I just finished board assembly! Looks good!
<hr>
Steve Graber<br>
A lightweight tube-frame sportscar for street and track<br>
http://www.grabercars.com
I just finished board assembly! Looks good!
<hr>
Steve Graber<br>
A lightweight tube-frame sportscar for street and track<br>
http://www.grabercars.com
<hr>
Steve Graber<br>
A lightweight tube-frame sportscar for street and track<br>
http://www.grabercars.com
Steve Graber<br>
A lightweight tube-frame sportscar for street and track<br>
http://www.grabercars.com
End plate templets
Is there a link to a set of end plate templates?
Almost ready to order
I'm curious..... You guys make it sound like the case/part number in the link above DOES NOT come with Ends.... ????
I'm pretty sure the flanged one comes with ends..... like in the picture in the link above... It also looks like there are ends below on the page selling the cases...
Correct me if I'm wrong of course... I'm trying to price mjlj as well as outline what needs to be done to build this for my project..
I'm pretty sure the flanged one comes with ends..... like in the picture in the link above... It also looks like there are ends below on the page selling the cases...
Correct me if I'm wrong of course... I'm trying to price mjlj as well as outline what needs to be done to build this for my project..
86 VW GTI -> project
Yes, the case in the order fo
Yes, the case in the order form does come with ends, they're just not pre-punched with holes specific for the MJLJ. You'll have to cut your own. Not too bad with a drill and a few files...
I'm in the process of finding out what it'll take to get pre-punched panels made.
Brent
I'm in the process of finding out what it'll take to get pre-punched panels made.
Brent
I need one case
Put me down for one case also
Ron Triano rondefly
Ron Triano rondefly