I've mislayed a process for a v2.2 board...
What do I have to do to get hold of a new CPU and load the correct program onto it?
Thanks!
alex
programming the CPU
Moderators: JeffC, rdoherty, stieg, brentp
programming the CPU
AFRacing LTD - www.afracing.com
But the correct Motorola MCU
Buy the correct Motorola MCU - Farnell in the UK (I think)
Get hold of the appropriate Motorola MCU bootloader software (not freeware, as far as I can ascertain)
Get/borrow a suitable Motorola programmer (can't even suggest the one you need)
Program the bootloader into the MCU using the programmer
Get a copy of hc08sprg.exe
Get the correct MJLJ software you need
Use hc08sprg.exe to program the MCU with the MJLJ software
OR
Pay a small amount of money to Brent by Paypal and get him to send you one
Get hold of the appropriate Motorola MCU bootloader software (not freeware, as far as I can ascertain)
Get/borrow a suitable Motorola programmer (can't even suggest the one you need)
Program the bootloader into the MCU using the programmer
Get a copy of hc08sprg.exe
Get the correct MJLJ software you need
Use hc08sprg.exe to program the MCU with the MJLJ software
OR
Pay a small amount of money to Brent by Paypal and get him to send you one