USER OUTPUTS...

mariodantas · Post by **mariodantas** » Wed Dec 19, 2007 8:42 pm

Hi friends.......

I've a doubt..... Do the User Outputs act as an earth (Negative) ????

MartinM · Post by **MartinM** » Thu Dec 20, 2007 12:20 am

Yes....

If the Output Mode is Normal in the Configurator then when they are:
- not activated, the connection into the MJLJ is open circuit
- activated, the connection into the MJLJ is earthed

If the Output Mode is Invert in the Configurator then when they are:
- not activated, the connection into the MJLJ is earthed
- activated, the connection into the MJLJ is open circuit

Post by **brentp** » Thu Dec 20, 2007 6:43 am

Hi Mario,

Yes, the outputs switch ground when they are activated. Also see the following documentation:

Installation guide:
http://www.autosportlabs.net/MJLJ_V3_ve ... hift_Light

Configuring the outputs:
http://www.autosportlabs.net/MJLJ_V3_Op ... le_Outputs

mariodantas · Post by **mariodantas** » Thu Dec 20, 2007 7:42 am

Many thanks to you fellows.....