Hello from Virginia

JMcDonough · Post by **JMcDonough** » Fri Jul 31, 2015 8:06 pm

From the page here:

http://www.autosportlabs.net/RaceCapturePro

toga94m · Post by **toga94m** » Sat Aug 01, 2015 12:01 am

XeNoMoRpH wrote:I updated my MS2v3 to the 3.4 firmware. Now I have reached a point where I want to actually hook into the RCP2 and realized I don't know where to start. From my understanding, the MS has a CAN-L and CAN-H wire. Not sure how that works in relation to CANbus and a RJ-45 connector.

On our Megasquirt 3 with 3.0 mainboard, I had to add two jumperwires between CPU and D37 to bring the signals out to the connector.. then I had to wire externally between the MS and the CANx module, which has a 4" jumper to the RJ45 socket on my MK1 hardware. It works, though Megasquirt's default broadcasting seems to overwhelm the MK1. I can get coolant and MAP numbers through to RCP dashboard, but trying for all the variables in the sample MS lua script is more than it can handle.

XeNoMoRpH · Post by **XeNoMoRpH** » Sun Aug 02, 2015 2:20 pm

Wow, sorry. It has been so long since I bought the RCP2 I forgot about the documentation.

I most likely have to add jumpers as well. I checked out my board before and it didn't look like the signal was carried to D37.