Autosport Labs

Hi guys, Need a little help.

I'm trying to-do a Firmware update, currently running version 3.0.0

I've ran:
hc08sprg.exe com1 4800 mjlJunior_V3.2.1.s19

get back:

Waiting for HC08 resest ACK... received 0xfc <good> .
Wrong calibrate response <0x00, must be 0xfc> . Target is not calibrated.

Try changing com port settings but no joy, Using a really old Laptop tho lol.

Just wondering if anyone has got any ideas.
Get a reponse back when using HyperTerminal

Does seem to communicate using Configurator v3.0.0

But would really like to get the v3.21 firmware on it.

Many thanks, Martin.

Hello,

Try removing the 4800 in your command and it should work.

Thanks for getting back to me with such a quick reply. Nice one.

without it I get:

received 0xe0 <off-key> .
Can't read mcu info <forgot to set single wir mode?>

Are you by chance using a usb->serial adapter? the hc08sprg.exe program does not work well with certain adapters. If so, try performing the firmware update using a computer with a standard serial port.