Page 1 of 1

poles

Posted: Tue Mar 22, 2005 7:59 pm
by Ivan
how bad is it if you have the power connection put wrong
meaning the + an - pole.
Is the controller safe for stupid men like me or will there be damage?
I felt that the transistors where heating up and pulled the plug,
than connected it good and there seems to be communication but
wil the controller stil work on the engine?
normally next week I will have the engine ready and see what I have done!!!

Ivan

pop

Posted: Tue Mar 22, 2005 10:09 pm
by Josh_b
you can quite easily pop the transistors but the main ic is protected somewhat. (been there done that) :-)