Autosport Labs

Hi there, i'm at the finishing stage of the megajolt install on my mini. I've come to wiring up my tacho and it is a nippon seiki tripple clock set up.

I have some photos, but my question is is it a RVI or RVC. Or even another variant?

If anyone can shed some light on how i can wire this in, that would be great!











Cheers
Dan.

You should be able to use the standard tach adapter circuit - outlined in our Installation guide - you can build a circuit here:

http://www.autosportlabs.net/MJLJ_V4_ve ... back_pulse

Or we have a small board pre-made you can purchase.

http://www.autosportlabs.com/tach-adapter-p-65.html