I'm currently using 3.2.1 configurator and controller firmware version 2.8.0 in my Zetec installation. All is working well, but I'm not sure I'm seeing full interpolation on the advance curve and there isn't an option for PIP filtering.
Is there a later version of either software and firmware that will work with my ancient board?
Best Firmware and Configurator for Old V2 board?
Moderators: JeffC, rdoherty, stieg, brentp
-
MustangSix
- Posts: 1
- Joined: Sun Feb 29, 2004 9:23 pm