Page 1 of 1
SensorX?
Posted: Fri May 09, 2014 6:39 pm
by jakekooser
Does it exist yet? Want to start hooking more stuff up and don't want to have to reinvent the wheel if a good solution is already available.
Posted: Thu May 22, 2014 6:33 pm
by jakekooser
anybody?
Posted: Sun May 25, 2014 7:39 pm
by brentp
Sorry for the late reply.
Jake, are you talking about the breakout board for RaceCapture/Pro ?
https://github.com/autosportlabs/SensorX
If so, we have a number of preliminary boards we can make available.
Posted: Sun May 25, 2014 9:35 pm
by jakekooser
Yes, that's the one. I would make it myself, but I don't have the equipment and time to figure that out right now.
But if you have them available,
Posted: Sun May 25, 2014 10:12 pm
by brentp
Ha, thanks. I'll work to add it to the store tomorrow, along with some sensors and antennas.
Posted: Sun May 25, 2014 10:46 pm
by jakekooser
Sweet. I'm still going to finish wiring up my RPM permanently - for now. Might be re-doing the whole works later but right now I have the get the car back together for my next track day because I'm going to be out of town this week.
Posted: Sat May 31, 2014 4:31 pm
by jakekooser
I don't see the SensorX on the store, did it make it?
Posted: Mon Jun 02, 2014 4:09 pm
by brentp
Here's the preliminary store entry; you can purchase today.
http://www.autosportlabs.com/product/se ... out-board/
The board is very small - about 1/2 x 2.5". It's designed to be mounted in-line and bundled with the wiring harness.
We took a photo but it is still stuck on our camera at the lab. Will upload today or tonight.