Page 1 of 1
Live View
Posted: Mon Aug 11, 2014 2:09 pm
by gizmodo
Is there any way to monitor the sensors right now other than creating a log and opening it?
Posted: Mon Aug 11, 2014 4:25 pm
by toga94m
I've been able to view sensors from the previous version droid app via bluetooth, even with the new firmware loaded. This link should still work -
https://play.google.com/store/apps/deta ... acecapture
Once bluetooth connects and you see battery voltage above zero (indicating there's bluetooth communications happening) swipe left-to-right till you get the screen of green numbers.
Tom
Posted: Mon Aug 11, 2014 5:32 pm
by momostallion
yea bluetooth + android app is the only way i know of.
Posted: Tue Aug 12, 2014 2:44 pm
by gizmodo
That's what I was afraid of. Unfortunately I don't have the bluetooth adapter.
Posted: Tue Aug 12, 2014 4:55 pm
by toga94m
You could go back to the V1 firmware and RaceAnalyzer 1.x, which has sensor display thru the USB connection. I've been powering my RCP through the PC's USB cable forever, haven't gotten it wired into the car yet.
Posted: Thu Aug 14, 2014 4:30 pm
by brentp
Correct, the live view is in the upcoming dashboard mode. We'll have the beginnings of that in our next release.
Currently you can monitor data in the following ways:
-BT module
-Realtime Cellular module (via web)
-Record to logfile
I know these are sub optimal for some of you, so thanks for your patience while we improve on the beta software.
