Autosport Labs

Calibration table for the Bosch 0 280 130 023 Temperature Sensor and similar OEM models.
Motec lists the spec for this sensor on their webpage. The sensor drops off above 230F and below 30F but can still give a close estimate for something like oil temp.

Thanks for providing this! What cars does this sensor usually show up in? We'll do a bit of research on this part #.

The actual brand and part # I bought was

ÜRO PARTS Part # 13621357414

From the research I could do it is similar to part

STANDARD MOTOR PRODUCTS Part # TX18

which seems to be a replacement for almost every manufacturer throughout the 80s and 90s


I'm eventually going to get a few brands of sensor and check the consistency between them but in theory the Bosch is listed as a replacement for both so the calibration should be the same.