Page 1 of 1
"Timer Speed" OS X the same as "Clock divider
Posted: Sun Jun 21, 2015 10:54 pm
by alangbaker
It's frustrating that when I look at the page for installing and configuring my CoilX RPM signal conditioner, there are things I'm supposed to set that don't look the same as in the OS X version of RCP...
Posted: Mon Jun 22, 2015 12:49 pm
by gizmodo
That isn't an operating system issue. Clock Divider was in the old RaceAnalyzer application. It was renamed to "Timer Speed" in the new version.
Posted: Mon Jun 22, 2015 5:27 pm
by alangbaker
Then someone badly needs to update this page:
select RPM for channel Name
select a sample rate. 10 to 20Hz is usually a good value to start with.
in advanced settings, select Mode = RPM, Timer Options = CLOCK / 128, and pulse per revolution to match the number of cylinders.
http://www.autosportlabs.net/CoilX#Race ... figuration
[/quote]
Posted: Mon Jun 22, 2015 9:40 pm
by brentp