Stopped working
Posted: Mon Nov 09, 2015 1:54 am
Hi,
My existing system has quit. It started as no start which I seemed to fix sometimes by moving the wiring. Other times I had to convert the ignition back to distributor to get to my destination. This weekend I pulled the MJLJ harness out and rebuilt it. When I re-installed it there was no start. I confirmed power to the coil pack, the EDIS, and the MJLJ. I also was able to swap the coil around so it isn't a matter of firing the wrong plugs. Also tried both polarities on the VR crank sensor. The last time I lost ignition the engine quit while running at idle shortly after a start. Does this trouble point toward a dying EDIS module? Or is there something else that commonly displays these symptoms?
EDIS4 MJLJ no recent changes to a working system that has run for several years.
Any ideas welcome,
Paul
My existing system has quit. It started as no start which I seemed to fix sometimes by moving the wiring. Other times I had to convert the ignition back to distributor to get to my destination. This weekend I pulled the MJLJ harness out and rebuilt it. When I re-installed it there was no start. I confirmed power to the coil pack, the EDIS, and the MJLJ. I also was able to swap the coil around so it isn't a matter of firing the wrong plugs. Also tried both polarities on the VR crank sensor. The last time I lost ignition the engine quit while running at idle shortly after a start. Does this trouble point toward a dying EDIS module? Or is there something else that commonly displays these symptoms?
EDIS4 MJLJ no recent changes to a working system that has run for several years.
Any ideas welcome,
Paul