Page 1 of 1
Bosch Brake Pressure Sensor
Posted: Wed Jan 06, 2016 8:58 pm
by notso2slo
So I am attempting to use a Bosch brake pressure sensor from a BMW DSC system, Bosch part 0265005303
I can't seem to get any variation in output, has anyone successfully used this sensor? I can get them for free, and they are easy to install in my current setup.
Posted: Fri Jan 08, 2016 5:47 pm
by toga94m
From
http://www.bmw-planet.com/diagrams/rele ... /index.htm it looks like pin 2 is the output, front & rear signals are named DGR1 and DGR2. But the diagram doesn't show the power/common connections...
http://rb-aa.bosch.com/boaasocs/index.j ... rod_id=218
which shows 1=ground 2=output 3=+5V supply and you need a pullup resistor between the +5V and output..
So, how many of these do you have for free?
Posted: Fri Jan 08, 2016 6:41 pm
by notso2slo
Lol, a few. I work at a wrecking yard which specializes in higher end cars. I'd offer to sell them cheap, but I can't guarantee if they work, and don't really have time to deal with "warranties"
Posted: Tue Jan 12, 2016 1:52 am
by madjak
I use the $30 ebay 1000PSI pressure sensors and they work very well.