Autosport Labs

Posted: **Fri Jul 21, 2017 7:01 am**

Flashing read me recommends saving and then reinstalling configuration.
This wipes the added CAN bus configuration fields.

Can I reflash to 2.11.0 again to get the new settings back?
Is there a way to avoid building the configuration from scratch again? The unit is not installed in the default orientation and has analog sensors so kind of a PITA.

Posted: **Sat Jul 22, 2017 5:57 am**

What that alert means - before flashing new firmware, make sure you have the configuration saved to a file. Do this by reading the current configuration from the unit, then press 'Save' to save it to a file.

After flashing, you can restore your configuration from that saved file - every setting should be restored.

Let us know how it works out!

Posted: **Sat Jul 22, 2017 6:52 am**

Your not getting my question.
I DID save and reinstall the config file. Now the added CAN mapping features provided by the firmware update are unavailable.
Bug?

Posted: **Sat Jul 22, 2017 7:03 am**

Sorry I misunderstood.

What firmware version was it originally saved under?

In any case, please try this, if you haven't tried it yet:

1) flash 2.11.0 firmware
2) restore saved config file
3) write config to RCP
4) Now read back config from RCP

Does the CAN mapping feature show up again?

Autosport Labs

Old Config file loaded onto firmware v.211.0

Old Config file loaded onto firmware v.211.0