Page 1 of 1

Hello from Toronto

Posted: Thu Sep 14, 2017 3:38 am
by EcotecMiata
I've been using Harry's with a Nexus 7 mounted in my car with a Dual 160 GPS and an Obdlink MX. To say it's unreliable is putting it mildly. Too much futzing. So ordered the /Race tonight.

I drive a '91 Miata with an Ecotec 2.4L engine and do typical autocross and HPDE/Lapping days. Car is a dedicated though Street legal track car. It's not very fun in the street with full Delrin and Spherical bushings, 800/500 Xida setup and it gets rather warm inside. Plan is to supercharge it next spring, already have some of the parts, using the Cobalt SS supercharger and manifold which will take me from roughly 180 to 260hp.

I'm a computer geek so data is everything.

Cheers

Paul

Posted: Sun Sep 17, 2017 5:57 pm
by brentp
Hi Paul, thanks for posting! Be sure to share pics of your car and install when you can, we'd love to check it out and share them!

Posted: Sat Sep 30, 2017 6:55 pm
by EcotecMiata
Got it installed, similar to someone else I believe that posted a Miata.

Have a Nexus 7 installed on the dash using a Proclip Mount.

Posted: Sat Sep 30, 2017 7:35 pm
by brentp
Nice. Proclip mounts are awesome!

Posted: Sat Sep 30, 2017 7:36 pm
by EcotecMiata
brentp wrote:Nice. Proclip mounts are awesome!
Now I need to figure out my Canbus mappings for GMLan Ecotec 2.4.

Posted: Thu Jan 18, 2018 4:53 pm
by EcotecMiata
Given my Racecapture/Track is installed with the cable facing the front of the car does that mean I need to tweak some of the settings in Accel/Gyro setup such as inverting pitch? What about X, Y, Z acceleration?

Paul