Disable CAN termination?
Posted: Tue Jan 02, 2018 5:27 pm
Is it possible to disable the internal CAN termination? I don't see anything in the software.
Hi,
Depends on the hardware version.
RaceCapture/Pro MK2 requires disabling hardware jumpers on board.
https://wiki.autosportlabs.com/RaceCapt ... ermination
RaceCapture/Track also has a jumper to enable or disable termination.
RaceCapture/Pro MK3, RaceCapture/Apex and PodiumConnect all have software controllable termination, configurable on the CAN bus screen under setup.
Hope this helps!