Page 1 of 1
Sierra 1.8 CVH front pulley
Posted: Mon Apr 10, 2006 3:14 pm
by capri_turbo
As title. I have the bottom pulley off said vehicle with 36 -1 trigger wheel attached... I need to get the trigger wheel removed from the pulley so I can attach it to my front pulley... any ideas as to how to get it off? tried a puller, but it won't fit. My next idea was to take it to a machine shop and have the middle turned out of the pulley, but I'm looking for a cheap otion...
Cheers
i use a couple of spanners,
Posted: Mon Apr 10, 2006 7:07 pm
by Josh_b
i use a couple of spanners, the open ended type and work round the wheel, its quite easy try a few spanner sizes etc
front pulley
Posted: Tue Apr 11, 2006 7:13 am
by michael
I managed it with a bit of heat not too much from a plumbers blow torch and a couple of large flat headed screwdrivers.
hope this helps
michael
Thanks guys... it's off
Posted: Tue Apr 11, 2006 12:26 pm
by capri_turbo
the spanner method is most efficient.