Search found 11 matches
- Sun Jan 11, 2009 11:27 am
- Forum: Q&A
- Topic: Revs now reading very low
- Replies: 5
- Views: 3519
OK, I've stripped back the diode circuit in my loom and the zener was shot,replaced it and I'm now a happy bunny again. Just need to fix the Jaw :( Unfortuanatly the creator of Jaw isn't as quick as yourself in replying to requests for help. Thanks again Brent for creating such a superb bit of kit o...
- Sun Jan 11, 2009 9:09 am
- Forum: Q&A
- Topic: Revs now reading very low
- Replies: 5
- Views: 3519
Thanks for that Brent, yes I'm using the classic diode circuit right off the coil pack, now I've had time to sleep on it, realised that having 15v now on that tach output isn't quite right, this is sort of confirmed when I switch on my lights the rev display on the tachometer raise quite alot, still...
- Sat Jan 10, 2009 11:52 pm
- Forum: Q&A
- Topic: Revs now reading very low
- Replies: 5
- Views: 3519
Revs now reading very low
Just to give you a bit of background, my megajolt has been perfect for about a year, and I recently got a Jaw kit to monitor fueling, anyway I have managed to break my jaw doing what a few people have done http://14point7.com/forum/index.php?topic=79.0 but ever since blowing the atmega8 micro on my ...
- Sun Oct 14, 2007 9:03 pm
- Forum: Operation
- Topic: Timing marks don't align with a strobe light
- Replies: 5
- Views: 7395
Having moved my toothed wheel round as per the suggstions from Richard (rbalmford )and as the engine did run before making this change does this mean I now should have to change round the wires to the coil pack? I have just checked the wires on the coil pack connector and have found that they are th...
- Sun Oct 14, 2007 4:19 pm
- Forum: Operation
- Topic: Timing marks don't align with a strobe light
- Replies: 5
- Views: 7395
- Sun Oct 14, 2007 10:38 am
- Forum: Operation
- Topic: Timing marks don't align with a strobe light
- Replies: 5
- Views: 7395
The stobe markings are about an 1 inch to the left of the timing marks. Hope that makes sense :D As it seems to be running, I think the best thing would be to wait until I have some coolent in then I can play with the toothed wheel position. Thinking about it, each notch in the wheel equates to 10 d...
- Sat Oct 13, 2007 9:11 pm
- Forum: Operation
- Topic: Timing marks don't align with a strobe light
- Replies: 5
- Views: 7395
Timing marks don't align with a strobe light
I've got a pinto and megajolt which although haven't had running for long as I haven't got to the point of doing the cooling system yet. After install started nearly first time, and that was only because I had a numpty moment and connected the ht lead wrong on the coil pack! Anyway I immediatly chec...
- Mon Oct 08, 2007 12:53 pm
- Forum: Installation
- Topic: Small 12v bulb for Shift Light
- Replies: 3
- Views: 3608
- Sun Oct 07, 2007 8:54 pm
- Forum: Installation
- Topic: Small 12v bulb for Shift Light
- Replies: 3
- Views: 3608
Small 12v bulb for Shift Light
Hi all Is it possible to use a small bulb like this one http://cgi.ebay.co.uk/DURITE-DASH-BOARD-WARNING-LAMP-GREEN0-609-24-OR-0-60974_W0QQitemZ120047640463QQihZ002QQcategoryZ9886QQtcZphotoQQcmdZViewItem instead of a led, I already have a spare one so wouldn't have to buy an led version but just dont...
- Sun Jan 28, 2007 9:46 am
- Forum: Operation
- Topic: TPS seems wrong way round
- Replies: 2
- Views: 3358
TPS seems wrong way round
When I start up the configuration software, my tps reading is high about 200, then if I turn the tps is goes low to about 45, I have 3 wires coming out of the tps 2 black and a brown, any ideas on what I have done wrong. didn't want to go swapping wires round incase I damage my controller. Any ideas...
- Fri Jan 05, 2007 8:18 pm
- Forum: Assembly
- Topic: UK parts source
- Replies: 31
- Views: 46676
Updated Farnell List
This is for the TPS version.
<a href="http://www.kilmartin.it/uploads/megajol ... s">Updated Farnells Component List </a>
<a href="http://www.kilmartin.it/uploads/megajol ... s">Updated Farnells Component List </a>