Autosport Labs

A question of clarification really. Just installed a V3 board with 3.1 firmwire and Config software on a Pinto 2 ltre engine. All worked very well first time out and engine runs no problem!! I ran the TPS calibration option which worked ok and got a good indication of TPS working from 0 to 100%. Hav...

Hi Brent, Bought myself a new, more expensive USB to serial converted, and it worked first time with latest release of software and firmwhat! Therefore advice to anyone looking at using USB to Serial converters would be you get what you pay for - spend £20 on a decent one rather than £5 as it may ...

Brent, The burning with the hc08 went smoothly with no problems so don't think it could be that. The USB to serial adapter was a cheap offering off ebay here in the UK and therefore I do have my doubts about it but strange it worked with all the other software on not the tuning software. When I get ...

Gentlemen, Many, many thanks for the quick reply. Brent, I originally tried V3.0.0 and V3.1.0 beta 1 with the original firmware you supplied blown onto the chip when I purchased from you last November. I then upgraded firmware to the 3.1.0 beta 1 version and again tried both. I then loaded one of Ma...

Just built V3 board and testing using a 9V battery on bench without any connections to TPS etc. Using a USB to serial adapter I am able to connect using hyperterminal. However, when I tried configurator software I seem to get a port connection (when changed to correct port I nolonger have a 'cannot ...