Autosport Labs

Hi Brent, thanks, I guess what im asking is how do I wire it? Ive looked at the instructions and am wondering if I just tie into the primary wires? The primary wires dont need to pass through the tach adapter? Is there a picture of how its physically done? I looked at the instructions. Dont know if ...

Hi guys, I have a rover v8 in an mgb with fuel injection. I have a tach adapter and am wondering how it wires into the system? I see that I need the coil trigger wires to go into this, do I just splice into them? or is there supposed to be an output wire from the coil packs? The original system took...

i was kind of hoping to install one to control the idle all the time, not just with a/c on and having it open fully. is this a possibility with the megajolt?
Randy

well the idle valve that is on the car now is simply a screw, it is not powered, you set the idle with it and thats it but ive noticed it varies weather it is hot and humid out or cool. i do not have a valve yet so im open to suggestions.
Randy

hi guys, i have a tr6 pi and want to install an idle control solenoid. can someone walk me through this? how do i set it up? the tr6 pi is a mechanically fuel injected engine and i was thinking of adding a/c and this would require bumping up the idle. thanks
Randy

hi all, i am trying to tune my ignition on the road and the timing jumps around because the load keeps moving. is there any way to stabilize this? i dont think its an electrical thing, but has anyone else experienced this?
Randy

hi brent, i got the cable and adapter in the mail from you yesterday and tonight i hooked the computer to the megajolt and it was communicating right away no problems....im not too sure what happened, i checked my old set up for continuity and everything checked out. oh well, i guess maybe it was fr...

hi brent, yes the unit is alive, i keep checking to make sure its getting power and i have checked its advancing the ignition with a timing light so im confident it works, there was nothing big that happened for me to figure out what happened, one of the wires broke off the communication cable and i...

hi brent, i went to the store today and exchanged my serial adapter just in case something went wrong with it, still no dice. i only have laptop and no serial port no other computer. i may be able to borrow another laptop for a bit but i am completely stumped. the ground wire for the megajolt was ap...

yes i have continuity .6 across the board
Randy

here is my connector from the back with the longer side on top.
Randy

hi brent, i checked for voltage and ground from the wires and all is well down to the connector.....the yellow is about 4.5 volts and the red is 6.25 i am getting the 4.5 thru the rj11 connector on the megajolt but not the 6.5 thru the megajolt, but i do get it at the end of the rj11. i took the meg...

hi brent, just sent you an email but i guess you saw the post so you can disreguard it. the cable break was the wires from the phone cable to the serial port female plug which goes to the usb/serial adapter it was the black wire that broke i believe so i unsoldered them all, cut the ends of the wire...

oh v4.0 and the drivers for the usb to serial port are installed
Randy

hey guys, had the mjlj all connected in the car and was tuning it when the serial to rj11 one of the wires broke off so i couldnt communicate with it anymore. i soldered it back up and now the mjlj is working, i can tell by the timing light, but it wont talk to the laptop for tuning! it gives the th...