Autosport Labs

Well if that would work it sounds good to me!

Anyone?

http://i94.photobucket.com/albums/l119/wipermotor/DSCF0866.jpg In the picture below you can see that one of the err. . teeth is not as wide as the others http://i94.photobucket.com/albums/l119/wipermotor/DSCF0869.jpg Here is the TFI module http://i94.photobucket.com/albums/l119/wipermotor/DSCF0874....

I'll grab you a picture of it after work

Basicly its just a 3 wire hall effect sensor conneted to an ignition module on the side of the distributor I think it has 4 wires that come out of the ignition module

Thanks for the reply! IIRC the EEC-IV used in my falcon doesn't have the EDIS built in, and fitting the later ECU would require a complete wiring change in the car :shock: and requires a $800 unit to flash it for the cam Heres a pinout for the ECU EEC-V Wiring Information 1 Keep Alive Power Battery ...

Hello there I have found myself in a bit of bother here! Basicly what I am doing is fitting a newer 6cyl engine into my older falcon (AU into ED for any australians reading), the 6cyl falcon motors are pretty simmilar but the newer motor uses coil packs and my car is setup for a dissy! No problem I ...