Autosport Labs

I'm going to ask a dumb question but how do I need to read de the factory inHG to advace table? the table itself looks like ---------------------- | inHG | advance | ---------------------- | 2.0 | 0 | | 4.0 | 0 to 1,0 | | 5.0 | 0 to 3,0 | | 6.0 | 2,1 to 5,1 | | 7.0 | 3,7 to 6,7 | | 8.0 | 4,8 to 7,8 ...

maybe there is an difference in you being a supplier and I'm an end user. As for the amazon shipping it is 7 dollars to ship to europe. so 57 dollars = 42,75 euro's. Then if I'm unlucky I need to pay tax (never happened with all my international items) but between 22 and 150 euro's I only need to pa...

amazon.com charges 49 dollars for a bosch 17014 http://www.amazon.com/Bosch-17014-Oxygen-Sensor-Fitment/dp/B000BZI4ZW 14point7 charges 70 dollars and my local breaker offered me an oem VW for 30 euro's (used). As I believe google the bosch LSU4.2 has many names - Bosch 17014 - Bosch LSU4.2 - Bosch 0...

@fulmnte I think 200 dollar for a controller is pretty much especially for my setup. It is just a simple carbed car that had a dizzy with points. For creating a map and finetuning a wideband can be usefull but after that maybe once a year or when the car is sounding a little odd. A wideband sensor c...

Yesterday I was playing with the datalogger and for some stupid reason I used Open datalog to start datalogging. When typing a new non exsisting filename and clicking on open I got an unhandled exception. I know I need to push the right buttons but for a future software release maybe you can look in...

As I'm currently having problems with fueling I was suggested on another forum to use a wideband lambda sensor to messure the A/F ratio. Now my car doesn't even have a narrowband so everthing needs to be custom. A wideband lambda sensor is fairly cheap (bosch 17014) but the controller is pretty expe...

wel I tried several options but for some reason it only got worse. I haven't driven it yet just stationary revving. When coming of the thotle it pops and bangs like a full spec rallye car I assume she is running a bit rich. But when pressing the throttle fast it gives mayor backfires into the air in...

are you running a MAP version or TPS? eighter way it seems that you have somekind of short in the communication between the MJ and the EDIS module. I suggest you check the pip/saw and shield from the edis module to the MJ. maybe you have a short there. I believe as long as you get no VR signal from ...

spandit, thanx for the explanation. I did indeed used a static advance, the documentation said use 6 degrees but to run on ron 95 petrol it needs to be between 8 and 10. So I used 10 as that is what I used with de dizzy setup. So If I read the RPM table right then the dizzy is designed to create max...

Finally after 2 years I had enough spare time to convert my project car to Megajolt. I'm using the v3 MAP version. The car ran on the base map but on idle and in low revs it gives me back fires. so I want to create my own map from the factory specs but I got stuck with the numbers. I used the xsl fr...

I mounted the triggerwheel on my crankpulley and I'm ready to install the module in the car. I also need to create a mount for the vr sensor but before I just stick it on I need to know if it needs to be at a certain position or can it be anywhere I have space for it? Does it needs to be at the tdc ...

Is this a amercian or europian pinto engine?

thanx,

I have a silver casing and a green pcb so i think a V3. Is there any way I can see the firmware version?

in april 2008 I bought a megajolt lite jr DIY kit, I assembled it and dry tested its functions with a laptop. due to personal circumstances the car dry stored for some time and i never got to fit the unit. Now its dragged out of hibernation and I want to install the megajolt. Now I have no idea what...

thanx for the info