which version do I have

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
DD
Posts: 16
Joined: Thu Oct 29, 2009 10:54 am

which version do I have

Post by DD »

in april 2008 I bought a megajolt lite jr DIY kit, I assembled it and dry tested its functions with a laptop. due to personal circumstances the car dry stored for some time and i never got to fit the unit. Now its dragged out of hibernation and I want to install the megajolt.
Now I have no idea what version i have and which software I need to use. I spotted a post on here with serveral versions I seem to have a V3.x and some updates (firmware).

can somebody help me to get started again. thanx

brentp
Site Admin
Posts: 6282
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Might be a V3 or V4. This should help guide you in determining which version you currently have.

http://www.autosportlabs.net/Megajolt_L ... t_Hardware
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

DD
Posts: 16
Joined: Thu Oct 29, 2009 10:54 am

Post by DD »

thanx,

I have a silver casing and a green pcb so i think a V3. Is there any way I can see the firmware version?

brentp
Site Admin
Posts: 6282
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Sorry, the red case is misleading as we had that as a short initial production run.

V4
Image
Use the latest V4 configuration software in the downloads section.










V3
Image
You likely need the V 3.2.1 configuration software in the downloads section.

The configuration software tells you what firmware you have on your controller. To see the controller firmware click "help/about" while connected to the controller via serial.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply