Autosport Labs

I used one of the mounting bolts for the water valve and only drilled one additional hole. Underneath are Teflon Spitfire leaf spring buttons and two aluminum standoffs. When i received the coil pack from Boost they had the towers marked wrong. That made for a interesting first start. After the blas...

I was going to have my shop mount the wheel on the back side of the pulley, with a sleeve to hover it away from the pulley. My shop guy explained the cost factor and i said lets put it on the front. So he put a flat spot on the front pulley and tack welded it. Then spun the pulley with trigger wheel...

Ok, I know this is a dumb question, but i would like to not blow up the MJLJ. When the wiring diagram says connector pin-out, is this looking at the MJLJ itself and the power is on the right? Or is this looking at the end of the cable? The reason i ask this is because the cable connector has sockets...

The 36-1 Trigger wheel that i have is smaller than my pulley. The teeth are just short of the edge of the pulley. Do the teeth have to be proud of the pulley? Will i get interference from the pulley edge running along side the teeth? (pulley is for a 1500 Spitfire) Thanks for any help! :?: The teeth...